Building Intelligent Solutions for Technology Space.
Toll Free Voice & Fax 800.770.7042
Twitter Google+ Facebook

CPU Holders, Computer Carts, CPU Dollys

CPU Holders keep CPUs off of the floor and away from harm. SMARTdesks CPU holders also provide a higher level of security. CPU holders save space. CPU holders suspend CPU towers off the ground so drives and connections are more accessible. CPU Holders promote Maximum CPU Security and CPU safety. Of course, CPU holders save space, but CPU holders protect CPUs against theft and accidental damage. Our CPU Holders are for both Tower CPUs and Small Form Factor CPUs. SMARTdesks CPU holders allow easy access to ports and cable management. Our under desk CPU holders, are designed to hang in line with our C-Leg for Pi™ and HorizonLine™ Computer Tables.

• EZ Cinch™ CPU Holder

 

Brig™ Maximum Security CPU Holder

Li'l Brig™ Small Form Factor CPU Holder

Sidemount Li'l Brig CPU Holder

MacMini Brig™ CPU Holder for Mac mini®

• le Grip™ CPU Holder

Basic CPU Holder

CPU Trolley


EZ-Cinch CPU Holder hold any size CPU under desk or computer tableCPU Holder CPU-EZC

 
EZ Cinch™ CPU Holder fits any CPU Tower Cpu or Small FForm Factor CPU EZ Cinch CPU Holder installed EZ Cinch CPU holder holds any size CPU
EZ Cinch straps any size CPU, large or small, to a heavy duty metal bracket, which hangs the CPU in the negative space of our leg systems for HorizonLine™, Pi™, Boomerang™ and MacTable™. The leg helps protect the CPU from accidental damage from custodial maintenance. Knee space is maximized and risk of a collision is minimized. The CPU is suspended above the floor, and the user has full access to cables and drives.

The mounting bracket may also be used without the leg mounting bracket, installing directly into the table top.

Print out more info!

Click to download specs for EZ-Cinch™
Download a pdf brochure
EZC CPU Holder

Easy installation, step by step.

pdf Download EZ Cinch CPU holder instructions
Download pdf
installation instructions
EZC CPU Holder

 

Add your own lock or cable tie for added security.

This mounting bracket is common to EZ-Cinch, The Brig and Li'l Brig CPU holders. Add your own lock or use a cable tie for added security. A wire clip is supplied to keep the mounting interlocked.

 

Back To Top


The Brig CPU Holder Maximum Security for Tower CPUsMaximum Security CPU Holder CPU-BRG

 

The Brig CPU Holder gives users easy access to cable connections and drives. Unlike simple open shelves or J type holders, passers by can't pick up the CPU in two seconds and disappear.

Carbon steel bars fit closely to the sides, and flanges on front and rear pans contain the CPU, preventing removal from the CPU holder.

Click to download specs for The Brig and Li'l Brig

Download a pdf brochure.
Brig CPU Holder

Download Brigg and Li'l Brig installation instructions

Download pdf installation instructions
Brig CPU Holder

 

The Brig maximum security CPU Holder

Even large CPU towers are kept safe and out of harms's way in The Brig™ CPU Holder. CPU hangs in-line with the leg, adding balance to the table with economy of space.

Brig CPU Holder witth C-Leg arrangement to prevent theft

The position of the leg makes it impossible to remove the CPU from the rear, and flanges prevent the CPU from being removed through the front. The CPU is shown in the extreme position in an attempt to remove it from The Brig. The CPU would normally sit on the bottom pan, moved 3-4 inches forward. In its normal position, there is no obstruction to cable connections.

Back To Top


The Li'l Brig CPU Holder for small form factor CPUsMaximum Security Small Form Factor CPU Holder CPU-LBG

 

Safe behind carbon steel bars, small form factor CPUs are confined to quarters. Sleek in-line design keeps CPU off the floor, away from hard knocks, protected by the Leg systems of Pi™ and HorizonLine™ computer tables.

Use your own padlock or cable tie to interlock the Li'l Brig™ to the table. Have complete access to drives and cable connections.

Click to download specs for The Brig and Li'l Brig

Download a pdf brochure.
Li'l Brig CPU Holder

Download Brigg and Li'l Brig installation instructions

Download pdf installation instructions
Li'l Brig CPU Holder

 

CPU Holder security

CPU security CPU holder
The carbon steel bars permit no side-to-side movement. The front and rear flanges keep the CPU contained.

CPU Holder in-line design for safety and space savings

The in-line design keeps the CPU safe and out of the way.

CPU holder keeps CPU off the floor, safe from theft.

The Li'l Brig CPU Holder gives you easy access to drives and cable connections, but the security to keep the CPU where it belongs.

 

      Back To Top

The Li'l Brig CPU Holder for small form factor CPUsSideMount Maximum Security Small Form Factor CPU Holder CPU-LBG-SM

CPU holder side mount detail

The CPU holder is fastened to the desk side panel with screws, providing a mounting system that is easy to install, but a deterrent to theft.

Side mounted Li'l Brig CPU holder with WireWonder™ cable managers

Lots of open space with cable organization well provided for. WireWonder™ Cable Managers are worth the upgrade if you have small components, or a number of cables to bundle. The 10 foot cord of the power strip easily fits in the WireWonder™.


CPU Holder for Mac mini CPU Holder for Mac mini® CPU-MMBRG-W

miniMac Brig CPU holder mini Mac CPU holder

click to downloakd minim Mac Brig CPU holder brochure

Download MiniMac Brig
CPU Holder Brochure

Works with MacTable™, HorizonLine™ and Pi™ Computers Tables, integrated with the steel leg mounting brackets. The U-channel mounts go around the 2” diameter legs, but they may also be installed with wood screws into the MDF for tables and desks that do not use our leg design. The kit comes with two sets of carbon steel columns to permit setup for one or two Mac mini® computers. Full access to drives and connections. Use your padlock for added security.

 

  Back To Top    

CPU Trolley CPU-TROLLY-B

Scooter CPU Trolly Width Adjustment of Scooter CPU Trolly  
Can't hang? CPU Trolley to the rescue! Base expands and contracts to fit large towers and small form factor cases with ease. Rolls on four carpet casters, two with locks. Steel construction, finished in black powder coating. Made in USA.
> Back To Top  

LeGrip™ CPU Holder CPU-GRIP

CPU-SL CPU Holder

White trim

CPU holder modeled with Vostro
White trim

Mounts directly to table bottom on slide bracket. When unit is installed, there is no access to release the CPU from its grip, providing effective asset security. Height and width adjustments fit thin client to tower sized CPUs.

CPU-GRIP-BL
LeGrip CPU Holder, Black trim

LeGrip CPU Holder, slides out and rotates for access to CPU, fits CPUs 3.6"-10" w, 12"-20" h. Made of 51% recycled material (by weight), 99% recyclable. Polished Aluminum with black trim.

CPU-GRIP-W
LeGrip CPU Holder, White trim

LeGrip CPU Holder, slides out and rotates for access to CPU, fits CPUs 3.6"-10" w, 12"-20" h. Made of 51% recycled material (by weight), 99% recyclable. Polished Aluminum with white trim.

CPU-GRIPSM-BL
LeGrip CPU Holder, SMALL, 
Black trim

LeGrip CPU Holder (Small); slides out and rotates for access to CPU, fits CPUs 1"-5" w, 6"-12" h, up to 15 lbs. Made of 48% recycled material, 99% recyclable. Polished aluminum with black trim.

CPU-GRIPSM-W
LeGrip CPU Holder, SMALL, 
White trim

LeGrip CPU Holder (Small); slides out and rotates for access to CPU, fits CPUs 1"-5" w, 6"-12" h, up to 15 lbs. Made of 48% recycled material, 99% recyclable. Polished aluminum with white trim.

 


Black trim
      Back To Top

Basic CPU Holder

Standard CPU holder

Our Basic CPU Holder CPU-STANDARD

Our Basic CPU holder offers 360-degree swivel and horizontal glides to bring CPUs in reach when needed, so users never have to assume awkward positions to perform normal tasks. Mounted on a track under the work surface, this CPU holder is both height and width adjustable, accommodating CPUs from 3" to 9" in width and 13.5" to 19.25" in height.

 

 

 

 
      Back To Top
 
       
GSA OGS New York State TX MAS Alabama