|SMARTdesks CTI Series Product Specs|
|FTL-843030-TKF Double Station flipIT (15" - 18") LCD Monitor Conference Table Module|
Materials and Construction Specifications
FI Monitor Panel Opening ÷ 19"w x 15"d with PVC edges to conform to flipIT monitor support panel. Sized to accept up to 17" LCD Panel.
flipIT Monitor Support Panel ÷ (2) 19"w x 15"d plywood panel laminated both sides with high-pressure decorative laminate to match top surface and banded in 3mm PVC. Mounts in Monitor Panel Opening using patent pending flipIT hinging system.
flipIT Mechanism ÷ (2) Combination of dual-control arms and dampening cylinders that actuate monitor panel rotation through extension or retraction of keyboard platform.
Keyboard Platform with Pullout Mousing Surface ÷ 2 Pullout platforms 21"w x 10"d, 27ń above floor. Keyboard actuates flipIT mechanism. Finished to match base panel and edge trim. Swivel or side-pullout mousing surface for right or left-hand use.
Tower CPU Bay ÷ 2 bays to the right of each user cccommodate mid-tower CPU cases up to 10"w x 24"d x 22"h.
Top Surface - 0.048" thick, high-pressure laminate (exceeds performance requirements of NEMA 3-1995 Grade HGS) bonded to 30mm thick 50 lb. medium density particleboard with phenolic resin impregnated backer sheet. All edges are banded in 3mm thick, color-thru PVC mechanically applied under pressure and heat. Top overhangs base 12" on left side.
Base Panels - 0.020" thick melamine coated finish thermally fused to both sides of 19mm thick 47 lb. medium density particleboard. All exposed edges (including bottom edges in contact with the floor - to prevent water damage) are banded in 3mm thick, color-thru PVC mechanically applied under pressure and heat.
Construction ÷ European 32mm woodworking technology employing steel-to-steel pin and cam connections (thru-drilled for full panel integrity) where needed to provide durability, ease of assembly and modularity.
Ventilation ÷Panels are assembled to permit adequate airflow around components.
Floor Glides - All units are provided with standard adjustable 1╣ń steel leveling glides with vinyl shield attached to metal inserts in the vertical support panels. 3/4" height edjustment range.
Integral Wire Management˙ - Vertical and horizontal wire channeling, 80mm side access grommets are positioned to align with other components and wall power/data access points.
| Computer Classroom Design | Conference Room Design | Media Center Floor Plans | Computer Classroom Desks | Classroom Computer Tables |