[ Back To Index ]
Go to the Wire Management Product Category
that interests you: |
| |
|
Cable Channel Ways for Desks & Tables |
Neat Links Wire Management Channel
|
Neat Links Wire Management Channel. Installs with double-sided tape (provided) or two screws (not provided);
2.6" d x 17" or 24" long. Black or Grey. Model numbers indicate dimension and color. |
Standard
J Channel
|
J Style Wire Management Channel; adhesive backed;
1" x 3"; black. |
WireWonder™
|
WireWonder attaches to vertical or horizonal surfaces with screws (not supplied), store small components inside, wrap excess cable around mushroom posts,
WM-WWC18: 17.625" long, inside dimensions: 2.5" x 3.375".
WM-WWC23: 22.5" long, inside dimensions: 2.5" x 3.375". |
WireWonder™
|
WireWonder8, attaches to vertical or horizonal surfaces, store small components inside, wrap excess cable around mushroom posts, 7.5" long, inside dimensions: 2.5" x 3.375". Shown installed on Quark™ Mobile Laptop Table |
Wire Management Channel
|
Wire Management Channel; 1 3/32" high by 7/16" wide, 26" long, or 1 to 6 ft long. Comes with double-sided tape installed; black. |
| |
Back to top |
|
Grommets for Desks & Tops |
80mm Grommet
|
Desk top wire access grommet with 80mm opening, rotating cover. Black. |
King Kong Grommet
|
King Kong Wire Management Grommet, oval, 6 1/2" x 3" overall, 5 7/8" x 2 3/8" inside, 5/8" deep. Cord slot size: 3 1/2" x 1". Black. |
Desk Grommet
|
Desktop Wire Management Grommet; wires pass under raised cover when in use, cover twists flush when not in use; installs in cutout 3.5" diameter, overall size 4.5" diameter, 1.25" deep, Black. |
Desk Grommet
|
Wire Management Pop-Up, 4" overall diameter, 3.3125" inside diameter; .6875" deep; cord slot size: .875" x 1.375", fits in a 3.5" cutout; cap has flip up tab to close and cover cord slot when not in use, Black. |
Desk Grommet
|
Clipper Gripper Wire Management Grommet; liner has a clip on the inner wall, 3" overall diameter; 2.28" inside diameter; .625" deep, fits into a 2.5" cutout; cap has flip up tab to close and cover cord slot when not in use; black. |
| |
Back to top |
|
Table Leg Wire Managers |
SnapChase™
|
Snap Chase; aluminum channel, snaps onto any 2" column leg to hold cords, 17.75" long,WM-WMCB = Black, or WM-WMCS=Silver. |
Leg Door
|
Wire Management Door for 202/205 Series Leg. (205 Series WMD leg shown). Not available in brushed steel, antique bronze finish or chrome. |
| |
Back to top |
|
Segmented Wire Managers
|
Interlinked Vertebrae
Wire Manager
Interlinked Vertebrae Wire Manager; 28 interlinked "vertebrae" that can be added or removed to change the length; two "U" clips included for mounting under desk; 1 3/8" high by 1 1/4" wide; 39" long. Round base weight optional. Black.
|
|
Vertebrae Carrier
Wire Manager
Vertebrae Carrier Wire Manager; designed for horizontal use, one 3 foot long vertebrae carrier and 15 individual vertebrae pieces, each vertebrae has four separate channels to carry wire, two main channels and two smaller ones, wires on top sit in a 1/2" deep trough; 3 1/8" wide by 1 1/2" deep, 3 ft. long. Black. |
|
Snake
Wire Manager
Snake Wire Manager; rectangular blocks snap together, bend and move; four separate channels; top plate screws to underside of work surface, heavy steel plate at the base; standard unit is 31 1/8".
|
|
Oval Spine
Wire Manager
Oval Spine Wire Manager; single channel on each side so cords can be kept separate where required
by code; screws under desk, comes with weighted base; 30" tall by 3 1/16" wide and 1 1/2" deep
|
 |
| Back to top |
Cable Ties & Velcro® Straps |
Nylon Cable Ties
|
3.75" Nylon Cable Ties,l Available In Black BK, Blue BL, Brown BR, Clear CL, Green GN, Grey GY, Orange OR, Purple PP, Red RD, White WH & Neon Yellow NY Model number indicates length: 3.75" or 7.5" |
Low Profile Cable Ties
|
Low Profile Nylon Cable Ties, Available In Black BK, Blue BL, Brown BR, Clear CL, Green GN, Grey GY, Orange OR, Purple PP, Red RD, White WH & Yellow NY LPR14.00 is 12" length; LPR7.00-10 is 7" length. |
Velcro®
Cable Straps
|
Velcro Straps: Available In Beige BG, Black BK, Blue BL, Green GN, Grey GY, Orange OR, Purple PP, Red RD, White WH, Yellow NY. Model number indicates length: 12" or 8" |
Wire Management Guides
Wire Management Guide using VELCRO® brand fasteners, 3 1/2" long by 1 3/4" wide. Comes with double-sided tape installed; black.
|
| |
Back to top |
|
Flexible Conduit Wire Management
|
Clean Cut™
|
 |
Clean Cut™
expands to allow connector ends to pass, then contracts to snug the bundle together. May also be cut with hot knife tool for a frayless end.
• Resists fraying when cut
...with scissors
• High abrasion resistance
• Temperature range
... -94° to 257° F
• Melt Temp. 482°
|
 |
| WM-CCP0.75-250 |
WM-CCP0.75-75 |
|
WM-CCP0.75-25 |
| WM-CCP1.00-250 |
|
WM-CCP1.00-50 |
WM-CCP1.00-25 |
| WM-CCP1.25-250 |
|
WM-CCP1.25-50 |
WM-CCP1.25-25 |
| |
Go to Hot Knife Tools |
|
Back to top |
|
|
|
Color matched hook & loop closure provides easy installation and convenient access for harness break-outs and rework of any section along the entire length of the run.Conforms to a wide variety of bundle diameters and wraps around irregular shapes. Cuts cleanly with hot knife tool.
|
|
| |
Flexo F6™
Flexo F6’s lateral split
to accommodate a wide variety of bundling requirements. The semi-rigid braid configuration simply closes around the entire instalation without the need for any additional fasteners (Velcro, tape, etc). the 25% edge overlap (at nominal diameter) allows coverage around inline plugs, connectors and splices. F6 will bend to a tight radius without distorting or splitting open will not impair or affect the flexibility of harnesses. Allows for addition or removal of wires without dissassembly. Cut to length with hot knife tool.
Specify Color, Black BK, Orange OR, Grey GY. |
• 25% Edge overlap
• High abrasion resistance
• Temperature range -94° to 257° F
• Melt Temperature 482° F
This simple tool makes installing long lengths of F6 sleeving a breeze. Just insert your bundle of wires into the shank of the tool and slide it along the split in the sleeving. As the tool travels along the sleeving, it deposits the wires and allows the split to close correctly.
WM-F6IT.5........F6 Tool for 0.50" Diameter
WM-F6IT.75......F6 Tool for 0.75" Diameter
WM-F6IT1.........F6 Tool for 1.00" Diameter
WM-F6IT1.25....F6 Tool for 1.25" Diameter |
| WM-F6N0.50-150 |
|
WM-F6N0.50-75 |
|
WM-F6N0.50-25 |
| |
WM-F6N0.75-100 |
|
WM-F6N0.75-50 |
WM-F6N0.75-25 |
| |
WM-F6N1.00-100 |
|
WM-F6N1.00-50 |
WM-F6N1.00-25 |
| |
|
|
|
WM-FWN1.25-100 |
|
WM-FWN1.25-25 |
WM-FWN1.25-12 |
| |
Go to Hot Knife Tools |
|
Back to top |
|
|
|
Color matched hook & loop closure provides easy installation and convenient access for harness break-outs and rework of any section along the entire length of the run.Conforms to a wide variety of bundle diameters and wraps around irregular shapes. Cuts cleanly with hot knife tool.
|
|
 |
 |
|
Unique hook sealing system eliminates spot taping and does not require an open end for installation. Easy access for inspection, rework or replacement of components. |
Apply to areas restricted by breakouts and large end fittings. Can be used to bundle wire harnesses and can be used as a substitute for molded channels. Cut to length with hot knife tool. |
|
|
|
| Hot Knife Tools |
|
For individual projects or
small volume production.
Large knife blade heats
quickly. |
 |
|
When AC power is not available. Refillable butane powered torch with pushbutton ignition. 932°F/500°C, up to 3 hours
capacity.
|
 |
|
2.5 inch blade
heats to 1112°F/600°C
in 10 seconds. For
production environments.
110VAC |
 |
| |
Back to top |
Threshold/Floor Wire Managers |
Threshold/Floor
Wire Managers |
Threshold/Floor wire manager; comes with double-sided tape installed; 3' and 6' lengths, may be cut to size, available yellow, grey & black. |
| WM-WM12-3Y |
WM-WM12-3G |
WM-WM12-3B |
| WM-WM12-6Y |
WM-WM12-6G |
WM-WM12-6B |
| |
|
Back to top |
|
|
DuraRace™
|
Hide and protect exposed wires on carpeted areas.
Dura-Race™ is braided from a tightly woven ballistic
nylon, with industrial strength hook closure. Adheres
to most industrial, high traffic carpeting with loop pile.
Easily lays over wires and cables to protect against
abrasion and avoid trips or falls from free-lying wires |
|
Non-Skid
|
 |
 |
Flexo Non-Skid (NS) is a unique combination of PET material braided together with high-friction polymer filaments. NS is engineered primarily for wire and cable management on smooth floor, high traffic environments, such as broadcast studios, where someone might inadvertently step on a cable snake and slip.. As long as there is no excessive pressure on the cables protected with
NS, the entire snake glides easily and quietly along the
floor. When local pressure is applied, such as when
someone steps on the cable, the high friction material
comes in contact with the floor and reduces the possibility
of the cable sliding out from underfoot.
|
|
| |
|
| |
|
| |
|
| |
|
| |
|
|
|
|
